Locate the icon that represents your printer. Right-click on the icon, left-click Printing Preferences, and then left-click the Maintenance or Utility tab.
After printing a nozzle check, examine the printed dot pattern. Each block, or for some patterns, each staggered horizontal and straight vertical line should be complete, with no gaps in the dot pattern.
Click Here to see examples of a nozzle check
A good nozzle check (lines):
A poor nozzle check (lines):
A good nozzle check (blocks, and squares):
A poor nozzle check (blocks, and squares):
A good nozzle check (individual colours):
A poor nozzle check (individual colours):
If no ink is printed or the nozzle check is incomplete, you will need to use the Head Cleaning utility from the Epson printer driver. After performing head cleaning you will need to print a nozzle check.
Head Cleaning - This process attempts to force a small amount of ink through nozzles in order to try to clean them.
Nozzle Check - This will print out a nozzle check sheet. This will show the condition of the print head nozzles and show if the nozzles are blocked.
The head cleaning and nozzle check must follow each other to complete a full cycle. Perform a head clean as follows:
Start with plain, A4 paper loaded in the printer.
Click on Head Cleaning.
Once cleaning has been completed, click on the option to print a Nozzle Check.
The printer will attempt to print a nozzle check sheet.
After printing a nozzle check, examine the printed dot pattern to see if there is any improvement. Each block, or for some patterns, each staggered horizontal and straight vertical line should be complete, with no gaps in the dot pattern. Compare the pattern with the earlier examples.
If there are gaps in the dot pattern, continue with another cycle and perform up to six cycles if necessary.
If the nozzle check is not printed completely and further head cleans do not improve the nozzle check and prints, try replacing the ink cartridges for the affected colours. If this fails to resolve the issue, your printer may require a service.
Also try powering off the printer and leaving it overnight. This will allow an opportunity for any dried ink to soften. After being left overnight, use the Head Cleaning utility print head again.
For more information, see your user guide (available from the Epson website), or the following Related Articles:
Na našich webových stránkách používáme soubory cookie. Budete-li pokračovat v prohlížení těchto webových stránek, souhlasíte s naším využitím souborů cookie. Další informace o tom, jak soubory cookie používáme a jak můžete nastavit své preference, naleznete v části Informace o souborech cookie